Location:Home > Products > Actuator > BQ7000/BQ7005 driver

    BQ7000/BQ7005 driver

    BQ-7000 series driver is composed of a reversible synchronous motor operation, the valve stem upward or downward to open and close the valve, when the valve fully open or fully closed, resulting in a force to drive the micro switch, power drive, drive to stop working, the drive in receiving the control signal, can open the valveopening is certain, and when there is no signal to stop at any point.

    BQ7000/BQ7005 driver

    For hot and cold water, low pressure steam.

    Medium temperature range: -10 DEG ~170 deg.

    The amount of leakage of KV value 0.03%.

    Pressure range: 1.6bar.

    Diameter from 50mm to 200mm.

    Connection mode: NP16 flange.

    BV7200 series valve is designed for use with BQ7000/7005 series driver supporting the use of the way.

    The BQ7005 actuator bracket selection of cast aluminum and plastic shell, small volume and light weight.

    The permanent magnet synchronous motor, with a hysteresis clutch mechanism, reliable self protection function.

    Suitable for a variety of control signal: incremental (floating point), voltage (0 ~ 10V), current (4 ~ 20mA).

    With 0 ~ 10V or 4 ~ 20mA feedback signal (optional).

    The driving gear adopts the metal gear, which greatly improves the service life of the drive.

    Low power consumption, high output power, low noise.

    The body has cast copper, ductile iron, cast steel, stainless steel a variety of materials to choose from, in order to meet the requirements of different working medium and temperature.

    The valve body has two kinds of threaded connection and flange connection, easy to install, the structure is in line with the IEC international standard.

    Body structure in the form of two - way balancing valve (balance type), three through the confluence and the three - way bypass valve.